Cutter BZP

CUTTER BZP Woodscrews further represent our goal of technological excellence. They are produced as are all CUTTER Screws to give ultimate performance and a perfect finish in all wood applications. The deep reinforced countersunk head recess allows the best possible fit to the driver bit, reducing “cam out” and providing extra strength at the critical junction between shank and head. The two patented slots (25mm and above) allow the screw to work closer to the edge without splitting, and the ribs and tucks under the head enable the screw to sit flush and tight without surface damage. The 20º needle point gives the ability to penetrate almost all timbers without a pilot hole and the sharp, wide deep thread with unique lubrication gives up to 40% less driving resistance and easy penetration. Supplied with a high quality Bright Zinc Plating to give the performance of CUTTER with a traditional finish. Presented in eye- catching, informative packaging the CUTTER BZP adds an extra dimension to the range of premium High Performance Woodscrews.

Characteristics
Applications
8200S210350164O | 8200S210350164 | 8200S210350240O | 8200S210350204 | 8200S210350254O | 8200S210350254 | 8200S210350304O | 8200S210350304 | 8200S210350504O | 8200S210350504 | 8200S210400164O | 8200S210400164 | 8200S210400204O | 8200S210400204 | 8200S210400254O | 8200S210400254 | 8200S210400304O | 8200S210400304 | 8200S210400404O | 8200S210400404 | 8200S210400504O | 8200S210400504 | 8200S210400604O | 8200S210400604 | 8200S210400704O | 8200S210400704 | 8200S210450304O | 8200S210450304 | 8200S210450404O | 8200S210450404 | 8221S210450804O | 8221S210450804 | 8200S210500404O | 8200S210500404 | 8200S210500504O | 8200S210500504 | 8221S210500604O | 8221S210500604 | 8221S210500704O | 8221S210500704 | 8221S210500804O | 8221S210500804 | 8221S210501004O | 8221S210501004 | –
Category:

Description

Pack Types Key: Craft Pack Outer

 

diameter (mm) thread form length available (mm) pack types available Find Out More
3.5 full 16 20 25 30 50
4.0 full 16 20 25 30 40 50
4.0 part 60 70
4.5 full 30 40
4.5 part 80
5.0 full 40 50
5.0 part 60 70 80 100

Additional Information